Battery Racks, Enclosures & Cabinets Battery Racks SBS offers seismic and standard battery racks for VRLA, flooded & Ni-Cad battery systems. We also offer spill containment systems consisting of interlocking HDPE pans and acid absorbing/neutralizing pillows as well as the traditional barrier/berm & liner/berm confihgurations.   Custom Battery Cabinets/Enclosures and Relay Racks SBS can design & construct custom enclosures for any reserve power application. Whether indoor, outdoor or other harsh conditions, SBS can fabricate an eclosure for Ac & DC power including chargers, batteries, UPS & SCADA controls.   The SBS Cool Cell/Enclosures® Passive temperature regulating enclosures that protect batteries from destructive temperature extremes can be engineered for any environment from artic to desert.  This technology requires no active AC powered refrigeration & utilizes no DC reserve power yet the inside of the cabinet can be maintained from -40F to +85F in almost any weather condition.   SPILL CONTAINMENT SYSTEMS An often overlooked piece to the reserve power battery system is the requirement for spill containment. This standard varies by state, county & municipality but in all cases necessitates a method for the absorbtion, capture & neutralization of corrosive acid or caustic base electrolyte for flooded wet cell lead-acid or nickel-cadmium battery cells as Outline under Article 64, Section 6401.99.1 as adopted by the UBC, UFC, NFPA & OSHA building standards.  SBS offers a variety of systems suited for new installation or retrofit.  Our systems employ the traditional berm-barrier with epoxy floor coating, the berm-barrier with formable EDPE polymer liner, or our exclusive SBS EconoPan® Series which is ideal for retrofit, temporary installations or use where containment is mandated for sealed VRLA batteries on racks or even in cabinets. Every battery room is different.  Every battery string is unique, so contact SBS to determine the best size & design for your application.  Naturally SBS can install these solutions with our batteries & racks or yours! SBS Article 64 UBC/NFPA    The EconoPan® allows for a completely flexible, adjustable & modifiable spill containment system suited for new installations as well as retrofit.  It can be installed without removing battery jars or racks in most cases. EDPE pans can be cut, modified, baffled or attached in virtually any shape. It is easily disassembled or reconfigured to accommodate add-change-delete environments. The system is provisioned with absorbant neutralizing pillows making any clean-up & disposal simple & quick.  Econo-Pan® Spill Containment Spill Containment Systems Data Sheet 23" SC wide containment pans 28" SC wide containment pans 34" SC wide containment pans            The more traditional Lb system offers the rigidity of historic solutions with a epoxy coated rubberized steel berm permanently affixed to the floor.  Containment is achieved by the installation of a custom tailored EDPE acid/base proof barrier-liner.  This system style is best suited to a new rack installation.   The legacy Xb system employs the same epoxy coated rubberized steel berms as utilized in the Lb system above.  The containment barrier is achieved via a polymer-epoxy floor coating that permanently seels the battery area from the floor eliminating any seepage or egress.  This system can be installed with any new battery rack but also is well suited for application with an existing battery rack as it will not require any battery removal or rack disassembly.