Water Injector System™

By Philadelphia Scientific
Filling batteries in 15 seconds or less, the Water Injector System™ is the fastest, most reliable battery watering system.

 

The Water Injector System™ single-point watering system from Philadelphia Scientific is the world's fastest, most reliable way to add water to industrial batteries. And the system is simple to use: and operator makes a hose connection, opens a valve and in 15 seconds or less the entire battery is watered - perfectly.

 

Eight times faster than filling a battery with a float-based system, most warehouses and DCs save hours of maintenance time per week.

 

Each injector has its own precision level-sensing valve enclosed in a protective housing. When the electrolyte level rises to the tip of the injector, the valve shuts off instantly. There are no floats or delicate exposed parts to stick or break, so the injectors are unaffected by oil and tar in the cells. They can function in extreme cold, hot, dry and abusive conditions.

 

The system saves you money two ways:

  • Cuts labor costs, often paying for itself within the first year of operation
  • Extends battery life by filling batteries to the proper level

 

The system also improves safety and environmental cleanliness. There is no need to peer into cells to inspect levels as with manual battery filling. Injectors fill each cell to the correct level, so there is no overfilling and no electrolyte spillage during charging.

 

Designed for harsh industrial environments, it is unaffected by abuse that would destroy most other systems, and continues to work dependably for the life of the battery. The Philadelphia Scientific Water Injector System™ has the best ROI of any available filling system.

 

For more product features, download the PDF Individual Spec Sheet at the bottom of this page.

 

Product Specifications

Input/Operating Pressure 25 to 35 psi
Flow Rate 8 - 10 gpm per string
Acceptable Battery Filling Temperature 35F to 160F (2C to 71C)
System Exposure Temperature -20F to 160F (-29C to 71C)
Max Valve Height Above Vent Opening 1.10 inches (2.79 cm)
Valve Body Material Polypropylene
Tubing Material Proprietary Flexible PVC
Fitting US Quarter Turn Opening & European DIN Opening

 

 

For additional information, pictures and specifications, click here.

 

 

Specification

Individual Spec Sheet datasheet-phil-sci-injector.pdf
Series PS Watering
Cell Dimension (Inches) -
Voltage(V) 12 - 96
Headquarters
N56 W16665 Ridgewood Dr. Menomonee Falls, WI 53051
Copyright © 2021-present Exponential Power Privacy Policy - Legal - Sitemap