Menu
Search
AT10 and AT30 Series: Microprocessor Controlled SCR Battery Chargers
AT10 and AT30 series chargers offer a combination of advanced technology microprocessor control and performance engineered modular construction which make them easy to set up, operate, and maintain.
Single phase units (AT10) are available from 12–130 Vdc and rated from 6 to 100 Amps. Three phase units (AT30) are available from 12–130 Vdc and rated from 25 to 1000 Amps.
- DC output voltages: 12 - 130 Vdc nominal
- AT10 - Single phase output amperage: 6 - 100 Adc
- AT30 - 3 phase output amperage: 25 - 1000 Adc
- Many options available
Application Information
Features
- Local LEDs and common form “C” alarm contact for AC and DC fail, high and low Vdc, positive and negative ground fault
- 1% digital LED meter for Vdc, Adc, timer hours & alarm settings
- 1% or less ripple with battery connected (unfiltered model)
- Manual or automatic 0–255 hour equalize timer
- Seismic Zone 4 analyzed/qualified
- ANSI 61 gray powder coated finish
- AC & DC breakers
- 30-year design life
- Current limit from 50% to 110%
- High DC voltage shutdown
- Reverse polarity protection
- NEMA and IEEE compliant
- UL and CSA listed
- 5-year product warranty
Common Available Options
- Filtered charger: 30mVrms filtering with battery connected*
- Battery eliminator: 30mVrms filtering without battery connected*
- Individual Form C alarm contacts/relays
- Medium or High rated AC & DC breakers
- Ground pad with compression terminal
- Lightning arrestor
- Fungus proofing/tropicalization
- Static proofing
*100 Vrms for 130V DC models
| Charger Model Number | AT10 and AT30 Series |
|---|
Applications
- Substations/Switchgear
- Power Generation
- Microwave Relay Sites
- UPS
- Telecommunications