Constant Current Battery Chargers

25 or 50 Amp Output Models

The Constant Current battery chargers replaced the discontinued Ametek Ferroresonant Multi-Range Accu-Charger.

Have a question? Need more information? We're here to help.

Application Information

Features

  • Models available in 1 to 48 V or 18 to 80 V CHV
  • Ferroresonant constant current charge available in 25 amp or 50 amp output models
  • Fully-integrated microprocessor control for dv/dt or elapsed time termination (Elapsed time selectable for 8, 12, 18 or 24 hours)
  • Charge over-discharged and sulfated batteries
  • Auto start with five second delay
  • Multi color LEDs indicating charging status and fault shutdown
  • Red push button for manual shutdown
  • Manual elapsed timer button
  • Supplied with seven foot AC line cord with 20 amp 120 V plug (Hard wired on HV models only, 208, 240 or 480)
  • Eight foot long output cables with dual connectors (SB175 and SB350)

Automatic Shutdown for the Following Conditions

  • Maximum or minimum cells are too high or too low
  • Charging current is too low
  • Battery cable is disconnected while charging
  • Elapsed time timer expired
  • CAUTION: DISCONNECTING THE BATTERY FROM THE CHARGER DURING THE CHARGE CYCLE WITHOUT MANUALLY STOPPING THE CHARGER CAN CAUSE DAMAGE TO BOTH OPERATORS AND EQUIPMENT AND VOID THE WARRANTY
UL Listed Yes

Applications

  • Forklifts
  • Material Handling